Are you noticing water on the ground around your toilet’s base? If your answer is yes, you should know that it isn’t a great sign. When you see water around your toilet’s base, it means your toilet is probably leaking – most possibly around the fixture’s base.
If that’s the case, you should get your dependable tools and begin repairing that leak rather than letting your bathroom to become an indoor pool.
You’ve Got a Loose Tee Bolt
Have you noticed some plastic caps around your toilet’s base? For those who do not know, these caps are covering tee bolts. They help firmly hold your toilet in position. The seal of the toilet could break whenever these bolts are damaged or loose. This can cause leaks to happen.
To fix this, you should change the position of your toilet so it is centered and leveled. Then, start tightening the bolts. You should go to the nearest shop and purchase a new one if the bolts are damaged or continue to freely spin.
Your Toilet Has a Broken Wax Ring
The wax ring is probably the one to blame if the base of your toilet is still leaking even if you have checked the state of your tee bolts and have attempted tightening them. You will have to replace them if that is the case.
- First of all, you have to go to the nearest shop and buy a new wax ring. If you don’t know how to find the right one, you can take a picture of the base of your toilet and ask a professional at the shop. They can help you look for a compatible replacement.
- After buying the replacement, the next thing to do is to prepare your toilet. You can begin by turning off the water supply through the water valve situated under the toilet tank. Then, to get rid of all the sitting water inside the tank, flush the toilet as much as possible. Then, unscrew the nut that holds the fill valve to get rid of any leftover water. Use a small bucket to catch the water. This will avoid further leaking. Finally, get rid of any leftover water from the toilet’s base by plunging it for several minutes.
- Next, you will have to get rid of the old wax ring and the toilet. Remove first the tee bolts from the floor and unscrew the line of water supply from the toilet. After doing this, you should be able to lift the toilet. Gently set the toilet down and start getting rid of the old wax ring.
- After removing the wax ring, you can then install the new one. First, secure the tee bolts in place and put the new wax ring over the flange. Place your toilet back in its original placement with the new wax ring.
If you don’t have the tools or don’t have the skills to fix your own toilet, the best thing you can do is to contact a professional Residential Plumbing Contractors Hamilton, ON.
Recent Comments